The 240V pad with input power 1.6-2.0W/dm2 has a life span of 8 to 15 years. Comprised of PET (Polyethylene terephthalate) resistance wire, producing an electric circuit made of enamel-insulated wire or resistance wire (Ø=0.04-0.1mm).
All Pebble Grey Mirrors use slim line demister pad of thickness 0.4mm, positioned neatly behind the Pebble Grey bathroom mirror.
No, the Demister Pad works independently of all the other features on your mirror. It is activated by a rocker switch located on the right hand side of your mirror.
The Demister Pad heats the surface of the bathroom mirror between 8-15 degrees Centigrade higher than the room temperature in around 15 seconds. The demister pads are made to produce a fixed number of Watts per square meter and so the device can run consistently and safely on full power without over-heating
Value for Money is guaranteed at Pebble Grey, meaning there is no need to worry about leaving the demister pad constantly active. Our illuminated and LED mirrors are uniquely manufactured and designed with ‘energy saving’ components to maintain a low running cost compared to other illuminated or LED mirrors on the market.
Pebble Grey illuminated and LED mirrors are pre-installed with full-size demister pads and do not rely on the heat produced from the lamps. These are known as Fog Free illuminated or LED mirrors and are a common misconception in the bathroom mirror market as they do not reliably demist the illuminated mirror or LED mirror.